[ Features ]
Because it incorporates heat-resistant metal heat exchanger, it is rich in durability and there is no worry of clogging.
It is a simple structure easy to maintain.

[ Usage ]
Ladle heating, melting furnace・holding furnace of nonferrous alloy, crucible furnace

[ Features ]
It is a new version of heat-resistant metal heat exchanger area which is twice the STB and improved preheated air temperature.

[ Usage ]
Ladle heating, melting furnace・holding furnace of nonferrous alloy, crucible furnace, heat treatment furnace

[ Features ]
It can simply replace the conventional burner and reduce fuel consumption.
Like the STBW, a heat-resistant metal heat exchanger is built in and the burner exhaust gas is connected to the connection hole of the main body,and the combustion air is effectively preheated in the burner.

[ Usage ]
Melting furnace・holding furnace of nonferrous alloy, crucible furnace, heat treatment furnace

[ Features ]
It is a indentation combustion method.
Connect the heat exchanger by piping, and utilize the heat of the exhaust gas for preheating the combustion air.

[ Usage ]
Gas carburizing hardening, clean hardening furnace、contiuous tempering furnace, Hot air temper furnace

[ Features ]
Because it is a straight pipe type, installation in a furnace is simple.
There are two kinds of ceramic tube and metal tube.

[ Usage ]
Metal heat treatment, clean hardening furnace, Oil quenching furnace

[ Features ]
It burns inside the ceramic tube and can be used as immersion heater for melting and holding of nonferrous metals like the electric heater type.

[ Usage ]
Melting and holding of nonferrous metals
Continuous galvanizing furnace of wire rod

[ Features ]
It burns inside the ceramic tube and can be used as immersion heater for melting and holding of nonferrous metals like the electric heater type.
Because the heat exchange fins are built in the burner body, it is possible to preheat the combustion air and save fuel consumption by about 20 to 30% (compared to our company).

[ Usage ]
Melting and holding of nonferrous metals
Continuous galvanizing furnace of wire rod

[ Features ]
It is a single ended heater with a large diameter (φ 210) × long length (effective 2000).
The heat distribution is also good in the length direction, and it can heat the furnace uniformly and speedily with high power of gas.
Because the heat exchanger is built in the burner body, it effectively preheats the combustion air and saves fuel consumption.
It is low NOx due to internal air circulation structure.

[ Usage ]
Metal heat treatment, Enamel baking

[ Features ]
Regenerative radiant tube burner uses two sets of burners with built-in ceramic heat reservoir and places them at the ends of the radiation tube.
It is an energy-saving burner that burns with high temperature preheated air by switching alternately between the combustion side and the exhaust (heat reserve) side.
Because the pressure loss of heat reservoir is small, it burns with low pressure gas / air, and the combustion noise is also quiet.
Due to alternate burning, tube surface temperature is uniform.

[ Usage ]
controlled atmosphere heat treatmenting furnace, indirect heating furnace, Immersion type melting ・holding furnace, baking oven